Pleated insect screen door

In de dag

Stap 1

Open de deuren volledig en meet de totale breedte en hoogte van de deuropeningen (de dagmaat) op drie verschillende plekken. Neem de kleinste maat en trek hier 2mm van af.

Let op: het systeem is 44mm dik.

Let op: mocht de dorpel schuin aflopen, neem de grootste hoogtemaat en kies een schuine ondergeleider.

Integrated face-mounted profiles

For face-mounted installation, a 3-part face-mounted installation can be chosen. With the 3-part face-mounted installation, the top and sides are attached to your frame with mounting clips. The bottom is glued with a separate bottom guide on the floor.

Step 1

Measure the width of the frame at different places. Take the smallest measurement. Also measure the height at different places from the top of the frame to the floor or threshold where the rail will be mounted.

Step 2

Measure the width of the frames on the left and right. On the mounting side, there must be at least 30mm space due to the cassette. On the closing side, we recommend that there is at least 20mm space.

Please note: if the threshold slopes, take the largest height measurement and choose a sloped bottom guide.

This type of frame is used when you can't properly mount a bottom rail anywhere. The entire screen is located in a frame that you attach to your window frame. So you can also mount the screen floating above the ground with this type of frame.

Measure the total width and height of where the frame needs to be attached.

Step 1

Measure the width and height -2mm and provide the total dimensions. De Gordijneur produces the size you ordered.

With this system, you always get a flat bottom guide.

Advice: The frame of the surface-mounted set has a width of 20mm per side. Therefore, maintain a free space of at least 20mm per side.